Table of Contents
Advertisement
47
2.
Route Vehicle Lap or
Lap/Shoulder Belt
Through Base Belt
Path
Review pages 36-38 and
your vehicle owner's manu-
al to determine what kind of
vehicle belts you have.
3.
Tighten Vehicle Belt
Firmly push down and
towards the vehicle seat
back while pulling shoulder
belt or free end of lap belt
to tighten.
4.
Check Belt Tightness
Hold the base at the belt
path with your weakest
hand.
Push and pull from side to
side.
If it moves more than 1 in.
(2.5 cm), try reinstalling the
child restraint, try another
seating location, or try the
LATCH belt.
5.
two corners of child restraint by infant's feet to make
sure it is locked to the base.
Failure to securely attach child restraint
to base can result in serious injury or
death.
6.
under front of child restraint to help make level
line parallel with the ground. Check often to be
sure padding is still in place and the belt is tight.
With Child Secured
in Child Restraint,
Attach Child
Restraint to Base
To attach to base, see
page 19. Pull up on front
Check Level Line
Repeat steps 1-5 if
level line is not parallel
with the ground.
Adjust the base if
needed. See page 20
on how to use the
base adjustment.
You may need to place
a large rolled towel(s)
or foam pool noodle(s)
48
Hide quick links:
Advertisement
Table of Contents
