2.3 Connecting to Power
Use only the supplied car adapter to power up the camcorder and
charge the built-in battery.
1.
Connect one end of the car adapter to the USB connector of the
camcorder. USB port input: DC 5V / 1A.
2.
Plug the other end of the car charger to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the
camcorder automatically powers on. Car charger input: DC 12 /
24V.
Note:
1. Red LED light indicates the battery is charging; when devices are connecting power
cord to charge and the red light flashes, it indicates the device temperature is too high
and should unplug the power cord immediately.
2. Please take note if the environment temperature reaches 45°C or above, the car
adapter still can supply power to camcorder, but it may not charge the battery. This is
characteristic of Lithium polymer battery and is not a malfunction.
6