SARK 110 User Manual page 65

Scalar Chart Mode • Graphical plot of two user-selected parameters in a rectangular chart
• Two markers with manual or automatic positioning
• Display detailed parameters for center frequency or any of the two
• Plots complex reflection coefficient in Smith Chart form
Smith Chart Mode
• Two markers with manual or automatic positioning
• Display detailed parameters for center frequency or either of the two
• Display all parameters for a single frequency
Single Frequency
Mode
• Graphical representation of series and parallel impedance equivalent
• VSWR Audio feedback
• Circuit models and automatic LC matching network calculator
• Maximum length: about 250 m
Cable Test Mode
• Displays step and impulse responses
• Graphical plot of one user-selected parameter in a scalar chart with
Field Mode
• Display max and min values
Display rectangular charts for four bands simultaneously
Multi-band Mode
• Frequency range: 1 kHz to 230 MHz
Signal Generator
Mode
• Programmable output level from -73 dBm to -10 dBm into a 50-ohm
• Continuous and frequency sweep modes
• Linear, logarithmic, bi-linear, and bi-logarithmic sweep modes
Markers Tracking modes: Peak Min, Peak Max, Absolute Min, Absolute Max ,
Value Cross Any, Value Cross Up, Value Cross Down
• Full color 3" TFT LCD 400 x 240 pixels
Interface
• 4 dedicated buttons
• 2 navigation keys
• USB Mini-B receptacle
PC Interface
• USB 2.0 Full Speed Composite Device:
rd
Rev 1.2.6 October 3 , 2015
SARK- - - - 110 SARK
SARK SARK
marker positions
marker positions
enhanced legibility
load
Mass Storage Class (internal disk)
o
- 65 -
110
110 110
© Melchor Varela – EA4FRB 2011-2015
User's Manual