Taking Screenshots - SARK 110 User Manual

Otherwise, press the appropriate button
to continue.
After completing the sweep scan, the
analyzer will save the results of the sweep
scan to the file.
Notice that the scan time is much longer
than usual due to the higher accuracy
setting and the additional number of
points.
Press the appropriate button to continue.

4.10 Taking Screenshots

Press the Save Screen [●] button to capture the current screen. Then enter the file name. By
default the file name has the format "sark_xxx.bmp", where xxx is an automatically assigned
number. To change the file name, use Navigator B to change the character value and Navigator
A to change the character position highlighted in inverse video. Press the Select [■] button to
validate the selection. Press any other button to cancel the operation.
Select the option «Load Bitmap File» or «Browse Bitmaps» from the «File» menu to review the
captured screenshots. Also, they can be reviewed on a PC because they are in Windows bitmap
compatible format.
rd
Rev 1.2.6 October 3 , 2015
SARK- - - - 110 SARK 110
SARK SARK 110 110
- 19 - © Melchor Varela – EA4FRB 2011-2015
User's Manual