SARK 110 User Manual page 28

reduces measurement ripple by doubling the number of samples taken, but at the expense of a
slower sweep speed. This enhancement of the measurements is more noticeable when using
automatic scales for measurement over a small range of values. The «Normal / low resolution»
option is equivalent to «Normal / fast» option, but the sweep speed is faster because the number
of measurement points is reduced by half.
Setup – Buzzer
This setup enables control of the analyzer's sounds.
Select «Enabled» to enable all the sounds. Select «Disable Key Click» to deactivate the
feedback click sound when pressing the buttons or the navigation keys. Alert and error sounds
will continue to be enabled. Select «Disable All» for an all-silent operation.
Setup – Backlight
This setup allows adjustment of the display's backlight intensity. The range is from 1 to 10,
where the higher value corresponds to the higher brightness.
rd
Rev 1.2.6 October 3 , 2015
SARK- - - - 110 SARK 110
SARK SARK 110 110
- 28 - © Melchor Varela – EA4FRB 2011-2015
User's Manual