Single Frequency Mode - SARK 110 User Manual

7 Single Frequency Mode

1 VSWR bar
2 Series impedance complex form
3 Circuit equivalent series
4 Series resistance and equivalent
inductance (or capacitance) values
5 Parallel impedance complex form
6 Parallel circuit equivalent
7 Parallel resistance and equivalent
inductance (or capacitance) values
8 Highlighted menu option
9 Main menu
The Single Frequency mode provides impedance measurements at a single frequency. All the
measured fundamental parameters at the selected frequency are shown in the display. In
addition, a VSWR graph is available for a quick visualization of this parameter. As well as the
two element equivalent circuit models, both series and parallel circuits are displayed as
schematics.
rd
Rev 1.2.6 October 3 , 2015
SARK SARK- - - - 110 110
SARK SARK 110 110
10 Detailed measurements
11 Detailed measurements extended
12 Frequency setting
13 Transmission Line length setting
14 Reference impedance setting
15 Calibration status
16 Run/Hold status
17 USB/Battery status
- 36 - © Melchor Varela – EA4FRB 2011-2015
User's Manual