SARK 110 User Manual page 47

The signal generator outputs continuously unless it is paused by pressing the Run/Hold [►||]
button. In the Hold state the level graph and power level indicators change to red. Signal
generation can be resumed at any time by pressing the Run/Hold [►||] button again.
In frequency sweep mode the signal frequency will sweep between two user-defined
frequencies. To change the sweep parameters, use Navigator A to highlight «Sweep» in the
main menu and press the Select [■] button to validate the different sweep parameters.
rd
Rev 1.2.6 October 3 , 2015
SARK- - - - 110 SARK 110
SARK SARK 110 110
- 47 - © Melchor Varela – EA4FRB 2011-2015
User's Manual