SARK 110 User Manual page 37

Use Navigator A to highlight «Mode» in the main menu. Press the Select [■] button to activate
the Mode popup submenu and use Navigator B to highlight «Single Frequency» submenu mode
option. Finally press the Select [■] button to enter into Single Frequency mode.
The analyzer performs the measurements continuously, unless it is paused by pressing the
Run/Hold [►||] button. The measurements can be resumed at any time by pressing the same
button again.
This mode offers optional VSWR audio feedback. When activated by the menu option «Audio»,
the analyzer produces beeps of different duration as an indication of VSWR. The audio is
produced only for VSWR values between 1.0 and 10.0 and the beep duration is shorter for lower
values.
There is an additional presentation mode where the VSWR readings are displayed with a big
font for easy viewing. Select «Disp» «Big VSWR» to select this presentation mode or «Disp»
«Two element circuit» to select the default presentation mode.
rd
Rev 1.2.6 October 3 , 2015
SARK- - - - 110 SARK 110
SARK SARK 110 110
- 37 - © Melchor Varela – EA4FRB 2011-2015
User's Manual