SARK 110 User Manual page 17

«Delete All»
Use the «Delete All» option to delete all user files.
When selecting the «Delete All» option, a confirmation dialog box is activated to prevent an
accidental deletion.
«Deep Sweep Save»
The deep sweep save function provides the capability of saving measurements with higher
accuracy and resolution. It permits a higher number of frequency points to increase the
frequency resolution to be specified and uses the higher accuracy settings during the sweep
scan; this means a double sampling rate and an average of four measurements per single
frequency point.
In addition, this function enables a user programmable timeout for the automatic start of
measurements to be specified. This function is similar to the self-timer function on cameras.
In order to use this function, first set the frequency and span range in any of the sweep modes
such as Scalar Chart, and then select «File» «Deep Sweep Save». The procedure is as follows:
rd
Rev 1.2.6 October 3 , 2015
SARK- - - - 110 SARK 110
SARK SARK 110 110
- 17 - © Melchor Varela – EA4FRB 2011-2015
User's Manual