BELT SANDER 600 WATT PEBS 600 BELT SANDER 600 WATT Operation and Safety Notes...
Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes Page...
Introduction Proper use ...Page 6 Features and equipment ...Page 6 Included items ...Page 6 Technical information ...Page 7 General safety advice for electrical power tools 1. Workplace safety ...Page 7 2. Electrical safety ...Page 7 3. Personal safety ...Page 8 4.
Proper use The belt sander is designed for dry sanding of large surfaces of wood, plastic, metal, plaster and painted surfaces. The device may only be used for dry sand- ing.
General safety advice for electrical power tools b) avoid touching earthed surfaces such as pipes, radiators, ovens and refrig- erators with any part of your body. There is an increased risk of electric shock if your body is earthed. Keep the device away from rain or moisture.
When undertaking prolonged sanding of wood, and in particular when working on ma- terials that give rise to dusts that are hazardous to health, the sander must be connected to a suitable external dust extraction device. Ensure that there is adequate ventilation when working on plastic, paint, varnish etc.
Tensioning / changing the sanding belt WarNING! DaNGEr OF INJUry! Before you carry out any work on the belt sander always pull the plug out of the mains socket. 1. Then release the tensioner for the sanding belt by moving the tensioning lever (see fig.
(with the reducer piece Operation Switching on and off When operating the belt sander you can select between intermittent or continuous operation mode. To switch on intermittent operation mode: Press the ON / OFF switch To switch off intermittent operation mode:...
Maintenance and cleaning WarNING! Before you carry out any work on the belt sander always pull the mains plug out of the mains socket. The belt sander is designed to be maintenance-free. Clean the device frequently. This should be done immediately after you have finished using it.
(2004 / 108 / EC): EN 50366, EN 55014-1, EN 61000-3-2, EN 61000-3-3, EN 55014-2 Type / Description of product: Belt sander 600 Watt Bochum, 31.03.2009 Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of further development.
Need help?
Do you have a question about the BELT PEBS 600 and is the answer not in the manual?
Questions and answers