Storage; Manually Moving The Scooter - CareCo Airlite Owner's Manual

Table of Contents

Advertisement

 Suggestion
Ask for help from CareCo to inspect or replace the fuse as the tiller shroud has to be
removed prior to replacing the fuse.
▓Tyres
The condition of the tyres depends on how you drive and use your scooter.
 Please check the tread depth regularly.
 Replace the tyres when the tread groove is less than 0.5 mm.
 Attention
1. When tyre tread depth is below 0.5mm the tyres may not grip well making braking
distances longer. Therefore replace the tyres as soon as they are found to have insufficient
tread depth.
.
 Attention
Before carrying out any maintenance, turn the power switch to OFF and remove the charger
cords.
 Suggestions
 Do not splash water onto the scooter as this could cause the electronic system to
malfunction lead to malfunction of the system electrics.
 Do not use petrol, solvents or vaporizing solutions as these may damage the shrouds.
 Do not use wax.

6.4 STORAGE

Make sure the vehicle is stored under the following circumstances:-
Make sure the seat is set in the 'Forward' position
-
Make sure the Power switch is turned to OFF
-
 Suggestion
Please store the scooter in a location where it is away from the direct sunlight or damp
conditions. When storing for a long time, please charge the battery to full power and then
disconnect the battery terminal. For details contact CareCo (UK) Ltd.

6.5 MANUALLY MOVING THE SCOOTER

 Turn the power switch to 'OFF' before moving.
 Lift the scooter by the chassis, and not by the bumpers. Lifting the scooter by the bumper
could
cause damage or injury.
 For your safety, always ask for help if required. You will need 2 or 3 persons when moving
or lifting
the vehicle.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents