1. Manuals
  2. Brands
  3. Xpresskit Manuals
  4. Automobile Accessories
  5. DBALL
  6. Installation manual

Xpresskit DBALL Installation Manual

Hide thumbs Also See for DBALL:
Table of Contents

Advertisement

Quick Links

Platform: DBALL/DBALL2
Firmware: TL1 Remote Start Ready (RSR) Installation
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.

Installation Guide

This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode using a Plug & Play
(TLTH1) T-Harness (Optional). This solution offers three (3) configuration options to control your system:
3x OEM Lock Remote Start Activation, RF Kit or SmartStart (all sold separately).
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle completely
on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to start the vehicle
from a distance.
Important!
This product is NOT compatible with vehicles equipped with a manual transmission.
WARNING - No takeover feature is available.
Index
Vehicle Application Guide................................................................................................................................................
OEM Remote Starter Detection.......................................................................................................................................
Type 1a (with T-Harness)................................................................................................................................................
Type 1b (without T-Harness)..........................................................................................................................................
Vehicle Wiring Reference Chart - Type 1.........................................................................................................................
Type 2a (with T-Harness)................................................................................................................................................
Type 2b (without T-Harness)..........................................................................................................................................
Vehicle Wiring Reference Chart - Type 2.........................................................................................................................
SmartStart/XL202 Installation Notes...............................................................................................................................
Programming
Module Programming......................................................................................................................................................
Module Reset...................................................................................................................................................................
Hard Reset.......................................................................................................................................................................
Feature & Option List.......................................................................................................................................................
Feature Programming......................................................................................................................................................
LED Diagnostics & Troubleshooting................................................................................................................................
Parking Light Error Codes...............................................................................................................................................
Limited One-Year Consumer Warranty............................................................................................................................
Quick Reference Guide...................................................................................................................................................
SmartStart 200/250 Revision B is equipped with D2D, which means it can be connected to an interface module and
used in Remote Start Ready (RSR) mode without the use of a remote starter. See the Module Programming
section for more information.
® Toyota and Lexus are registered trademarks and property of their respective companies.
Rev.: 20150709
02
03
04
05
06
07
08
09
10
11
12
12
13
14
15
16
17
18
© 2015 Directed. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DBALL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Xpresskit DBALL

Summary of Contents for Xpresskit DBALL

  • Page 1: Table Of Contents

    Installation Guide This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode using a Plug & Play (TLTH1) T-Harness (Optional). This solution offers three (3) configuration options to control your system: 3x OEM Lock Remote Start Activation, RF Kit or SmartStart (all sold separately).

  • Page 2: Vehicle Application Guide

    Platform: DBALL/DBALL2 Firmware: TL1 Remote Start Ready (RSR) Installation Rev.: 20150709 Page 2 Vehicle Application Guide The following table lists the vehicles and features which are compatible with this product. The number assigned to each year allows you to determine which installation type should be used for your vehicle.

  • Page 3: Oem Remote Starter Detection

    If the Vehicle is Equipped with an OEM Remote Starter If the vehicle is equipped with an OEM remote starter, the DBALL LED will start flashing orange to indicate its detection. To skip bypass and use convenience only, press the programming button 5 times.* The reason for this is to allow aftermarket security to be installed while keeping the factory remote starter active.

  • Page 4: Installation Type 1A (With T-Harness)

    Installation Type 1a (with T-Harness) Important! The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL. Refer to the Wiring Reference Chart section on page 6 for more information on specific wiring and connections.

  • Page 5: Type 1B (Without T-Harness)

    Installation Type 1b (without T-Harness) Important! The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL. Refer to the Wiring Reference Chart section on page 6 for more information on specific wiring and connections.

  • Page 6: Vehicle Wiring Reference Chart - Type 1

    Platform: DBALL/DBALL2 Firmware: TL1 Remote Start Ready (RSR) Installation Rev.: 20150709 Page 6 Vehicle Wiring Reference Chart - Type 1 Wire function Connector Wire color position CAN High Diagnostic Connector Light Green CAN Low Diagnostic Connector White Toyota Corolla Not equipped...

  • Page 7: Type 2A (With T-Harness)

    Installation Type 2a (with T-Harness) Important! The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL. Refer to the Wiring Reference Chart section on page 9 for more information on specific wiring and connections.

  • Page 8: Type 2B (Without T-Harness)

    Installation Type 2b (without T-Harness) Important! The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL. Refer to the Wiring Reference Chart section on page 9 for more information on specific wiring and connections.

  • Page 9: Vehicle Wiring Reference Chart - Type 2

    Platform: DBALL/DBALL2 Firmware: TL1 Remote Start Ready (RSR) Installation Rev.: 20150709 Page 9 Vehicle Wiring Reference Chart - Type 2 Wire function Connector Wire color position WARNING CAN High Diagnostic Connector Light Green - No takeover feature is available CAN Low...

  • Page 10: Smartstart/Xl202 Installation Notes

    Button 1. Use the D2D Crossover (XOVER) cable that is provided with XL202, and NOT the one in the DBALL package. 2. The modules must be connected in a specific order. Refer to the Module Programming section for more information.

  • Page 11: Module Programming

    Note: Before connecting either the XL202 or SmartStart module to DBALL, it is important to ensure that the proper feature and function programming is selected using XpressVIP (version 4.5 or higher). Visit www.directechs.com to download the latest version of the application.

  • Page 12: Module Reset

    Platform: DBALL/DBALL2 Firmware: TL1 Remote Start Ready (RSR) Installation Rev.: 20150709 Page 12 Module Reset A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed to the module using the web config tool will not be affected.

  • Page 13: Feature & Option List

    3.Tail Glass Opening: When available, will operate the tail glass. 3. Tail Glass Opening* The OEM alarm will not be controlled by DBALL upon remote start. No disarm 1. Disabled or arm command will be executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.

  • Page 14: Feature Programming

    Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. When installing the DBALL in RSR using 3x OEM Lock Remote Start Activation only, there is no aftermarket transmitter on which to press lock/unlock to change the options of the selected feature.

  • Page 15: Led Diagnostics & Troubleshooting

    Platform: DBALL/DBALL2 Firmware: TL1 Remote Start Ready (RSR) Installation Rev.: 20150709 Page 15 LED Diagnostics & Troubleshooting Status Description Troubleshooting Programming the Module Make sure the D2D harness is connected or that the 12 Volt is Module has no power.

  • Page 16: Parking Light Error Codes

    Platform: DBALL/DBALL2 Firmware: TL1 Remote Start Ready (RSR) Installation Rev.: 20150709 Page 16 Parking Light Error Codes The parking lights on your vehicle will flash a specific number of times 3 seconds following an unscheduled shutdown or failure to start. Each flashing pattern is described below.

  • Page 17: Limited One-Year Consumer Warranty

    Platform: DBALL/DBALL2 Firmware: TL1 Remote Start Ready (RSR) Installation Rev.: 20150709 Page 17 Limited One Year Consumer Warranty For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material...

  • Page 18: Quick Reference Guide

    Quick Reference Guide DBALL/DBALL2-TL1 Remote Start Ready (RSR) Installation Remote Start Ready (RSR) List of Available Commands Remote Start Ready (RSR) is a function that enables the interface Note that the information below is for Viper, Clifford and Python models. Icons and module to remote start the vehicle completely on its own.

  • Page 19: Smartstart Compatible

    Now you can remote start, lock and unlock your car just by pushing a button on the fob, DBALL will send a signal to the vehicle in order to shut off the engine. your smartphone; using the SmartStart App from Directed, the leader in vehicle security and remote start.
  • Page 20 Quick Reference Guide DBALL/DBALL2-TL1 Remote Start Ready (RSR) Installation Activating/deactivating EIPS: To activate EIPS, remove all keys from the vehicle and close all doors while the  engine is running. To deactivate EIPS, do one of the following actions: ...

This manual is also suitable for:

Dball2

Table of Contents

Save PDF