1. Manuals
  2. Brands
  3. Xpresskit Manuals
  4. Automobile Accessories
  5. DBALL
  6. Installation manual

Xpresskit DBALL Installation Manual

Chrysler3 remote start ready (rsr)
Hide thumbs Also See for DBALL:
Table of Contents

Advertisement

Quick Links

Platform: DBALL/DBALL2
Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.

Installation Guide

This guide supports the installation of a DBALL in Remote Start Ready (RSR). This solution offers
three (3) configuration options to control your system: 3x OEM Lock Remote Start Activation, Optional
RF Kit or SmartStart (both sold separately).
The optional Plug & Play T-Harness THCHD3 (sold separately) provides simpler and faster installation.
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle
completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to
start the vehicle from a distance.
Important!
This product is NOT compatible with vehicles equipped with a manual transmission.
Index
Vehicle Application Guide......................................................................................................................................................................
Key2GO................................................................................................................................................................................................
Installation (Wiring Diagrams & Vehicle Wiring Reference Charts)
..................................................................................................................................................
Type 1 - Without T-Harness
Type 1 - With T-Harness THCHD3.......................................................................................................................................................
..................................................................................................................................................
Type 2 - Without T-Harness
Type 2 - With T-Harness THCHD3.......................................................................................................................................................
SmartStart/XL202 Installation Notes.....................................................................................................................................................
Module Programming............................................................................................................................................................................
Key2GO Programming..........................................................................................................................................................................
Module Reset & Hard Reset..................................................................................................................................................................
Feature & Option List............................................................................................................................................................................
Feature Programming...........................................................................................................................................................................
LED Diagnostics &Troubleshooting......................................................................................................................................................
Parking Light Error Codes.....................................................................................................................................................................
Limited One-Year Consumer Warranty..................................................................................................................................................
Quick Reference Guide.........................................................................................................................................................................
SmartStart Compatible
SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Remote
Start Ready (RSR) mode without the use of a remote starter. See the Module Programming section for more
information.
® Chrysler, Dodge and Jeep are registered trademarks and property of their respective companies.
Rev.: 20160608
02
02
03
04
06
07
09
10
11
12
13
13
15
16
17
18
© 2016 Directed. All rights reserved.

Advertisement

Table of Contents
loading

Related Manuals for Xpresskit DBALL

Summary of Contents for Xpresskit DBALL

  • Page 1: Installation Guide

    Installation Guide This guide supports the installation of a DBALL in Remote Start Ready (RSR). This solution offers three (3) configuration options to control your system: 3x OEM Lock Remote Start Activation, Optional RF Kit or SmartStart (both sold separately).

  • Page 2: Vehicle Application Guide

    Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 2 Vehicle Application Guide The table below lists the vehicles and features which are compatible with this product. Refer to the following pages for more information on installation wiring, programming and troubleshooting for these vehicles.
  • Page 3 Refer to "Vehicle Wiring Reference Charts" section on page 5 for more information on vehicle-specific connections. Important! The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL. Mini-relay is recommended, but is not supplied.
  • Page 4 Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 4 Type 1 Installation with T-harness THCHD3 These T-Harness connectors are NOT interchangeable. They will fit ONLY the appropriate vehicles. OBDII 6-pin Connectors OBDII T-02 Diagnostic 16-pin Connector...
  • Page 5 Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 5 Type 1 - Vehicle Wiring Reference Charts Wire colors should only be used as a reference. You should always test a wire's function and pin location before connecting to it.
  • Page 6 Refer to "Vehicle Wiring Reference Charts" section on page 5 for more information on vehicle-specific connections. Important! The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL. Mini-relay is recommended, but is not supplied.
  • Page 7 Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 7 Type 2 Installation with T-harness THCHD3 These T-Harness connectors are NOT interchangeable. They will fit ONLY the appropriate vehicles. OBDII 6-pin Connectors OBDII T-02 Diagnostic 16-pin Connector...
  • Page 8 Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 8 Type 2 - Vehicle Wiring Reference Charts Wire colors should only be used as a reference. You should always test a wire's function and pin location before connecting to it.

  • Page 9: Smartstart/Xl202 Installation Notes

    Button 1. Use the D2D Crossover (XOVER) cable that is provided with XL202, and NOT the one in the DBALL package. 2. The modules must be connected in a specific order. Refer to the Module Programming section for more information.

  • Page 10: Module Programming

    Note: Before connecting either the XL202 or SmartStart module to DBALL, it is important to ensure that the proper feature and function programming is selected using XpressVIP (version 4.5 or higher). Visit www.directechs.com to download the latest version of the application.
  • Page 11 Version 4.5 or higher of XpressVIP must be installed on your computer to complete this programming sequence. Remove the DBALL from the vehicle and reconnect it to your computer. The Directechs web site will automatically recognize that you are moving onto the second phase of the programming sequence.

  • Page 12: Module Reset

    Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 12 Module Reset A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed to the module using the web config tool will not be affected.

  • Page 13: Feature & Option List

    2. Low When Heated Seats are activated, they will be set to LOW. The OEM alarm will not be controlled by DBALL upon remote start. No disarm or arm command will be 1. Disabled executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.

  • Page 14: Feature Programming

    Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. When installing the DBALL in RSR using 3x OEM Lock Remote Start Activation only, there is no aftermarket transmitter on which to press lock/unlock to change the options of the selected feature.

  • Page 15: Led Diagnostics & Troubleshooting

    Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 15 LED Diagnostics & Troubleshooting Description Troubleshooting Module programming Module has no power. Check the power connections. If the LED is red after the ignition is ON, check for CAN-High...

  • Page 16: Parking Light Error Codes

    Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 16 Description Troubleshooting D2D and W2W commands Flashes LOCK command received. orange If the bypass module fails to flash, it means the module did Flashes UNLOCK command received.

  • Page 17: Limited One Year Consumer Warranty

    Platform: DBALL/DBALL2 Firmware: CHRYSLER3 Remote Start Ready (RSR) Installation Rev.: 20160608 Page 17 Limited One Year Consumer Warranty For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material...

  • Page 18: Quick Reference Guide

    Quick Reference Guide DBALL/DBALL2-CHRYSLER3 Remote Start Ready (RSR) Installation Vehicle Takeover with Get In and Go* Pit Stop Mode The Pit Stop Mode feature is practical when you need to stop and run an errand, but Close the vehicle doors, hood and trunk, then press wish to keep the engine running.
  • Page 19 Quick Reference Guide DBALL/DBALL2-CHRYSLER3 Remote Start Ready (RSR) Installation 3x OEM Lock Remote Start Activation SmartStart Compatible This solution includes the option to remote start your vehicle by pressing the Lock This system is compatible with Directed SmartStart 3.0. For button 3 times consecutively.

This manual is also suitable for:

Dball2

Table of Contents