Save The Configurations; Login - Paradyne 1740 SHDSL User Manual

2/4-wire router

Hide thumbs Also See for 1740 SHDSL:

Table of Contents

16.1.7

Save the Configurations

The new parameters can function immediately without being saved to the flash memory. However, to use

these parameters after you restart the router, you must save them to the flash memory.

To write the configurations, enter MAIN/WRITE and press the Y key. After saving the configurations, you

will be prompted if you need to reboot the device. Press the Y key to reboot the device or press the N key

to keep operating the device.

16.1.8

STEP 1: Configure your workstation to the same network segment as the router, such as IP address

192.168.1.133 and subnet mask 255.255.255.0.

1740-A2-GB20-00

July 2004

1740 SHDSL 2/4-Wire Router User's Guide

Table of Contents