Paradyne 1740 SHDSL User Manual page 56

1740 SHDSL 2/4-Wire Router User's Guide
If a wrong format of the file us uploaded, a failure message will display during the upgrade. The following
is an example of upgrade failure resulting from an incorrect file format.
Before performing the TFTP upgrade, run the TFTP software. Click on Utilities on the Advanced menu
bar. Fill out the TFTP Server IP address, file name, and upgrade type.
Software upgrade: Check Download and choose Firmware in the column to the right.
Homepage upgrade: Check Download and choose Homepage in the column to the right.
Configuration backup: Check Upload and choose Configuration in the column to the right
Retrieving Configurations: Check Download and choose Configuration in the column to the right
After completing the settings, click Apply to perform the function and note the following.
After software or homepage upgrades are complete, reboot the device to run the new file.
After the configurations are retrieved, also write the configurations to the Flash memory.
The following is an example of how to set up the parameters for software upgrade.
56 July 2004 1740-A2-GB20-00