Oam Loopback - Paradyne 1740 SHDSL User Manual

2/4-wire router

Hide thumbs Also See for 1740 SHDSL:

Table of Contents

1740 SHDSL 2/4-Wire Router User's Guide

13.2

OAM Loopback

Click on Utilities on the Advanced menu bar, and click on the Loopback tab on the main screen.

After filling out the following parameters, click Start Loopback to perform the loopback.

Flow Type

Choose the F5 loopback type. Seg is the segment loopback. It verifies the connection

between the router and DSLAM. Ete is the end-to-end loopback, verifying the connection

between the router and the ISP Broadband RAS.

VPI

Specify the VPI that will perform the loopback.

VCI

Specify the VCI that will perform the loopback.

Loopback

Specify the ID number on the ATM network that will loop back the signals.

July 2004

1740-A2-GB20-00

Table of Contents