Overshoot Prevention Function - Mitsubishi Electric MELSEC FX Series User Manual

FX -4LC User's Manual
3U
Caution
• Cascade control is disabled when heating/cooling PID control is selected.
• The loop breaking alarm function is disabled in heating/cooling PID control.
• The loop breaking alarm dead zone is invalid in heating/cooling PID control.
• The MANUAL mode is not available in heating/cooling PID control.
• The output limiter lower limit is invalid in heating/cooling PID control.
6.6.2

Overshoot prevention function

The overshoot prevention function is enabled in heating/cooling PID control.
42
→ For details on the Overshoot prevention function, refer to Subsection 6.4.2.
6 Introduction of Functions
6.6 Heating/cooling PID control