Bfm#87][Bfm#127][Bfm#167][Bfm#207] St (Startup Tuning) Execution Command - Mitsubishi Electric MELSEC FX Series User Manual

FX -4LC User's Manual
3U

8.2.51 [BFM#87][BFM#127][BFM#167][BFM#207] ST (startup tuning) execution command

To these buffer memories, set stop or execution of startup tuning.
Write "K0" to stop startup tuning.
Write "K1" to perform startup tuning.
BFM No.
CH1 CH2 CH3 CH4
#87 #127 #167 #207
Caution
• These buffer memories are valid only in standard PID control.
• If control is started while both the AT execution command buffer memory and the ST execution command
buffer memory are set to "1", auto tuning is started.
• Startup tuning is not started if the conditions for performing startup tuning are not satisfied.
→ For details on the conditions for performing ST (startup tuning), refer to Subsection 6.9.2.
→ For details on the ST (Startup tuning), refer to Section 6.9.
Description
0 : Stops ST (startup turning)
1 : Performs ST (startup turning)
8 Buffer Memory
8.2 Buffer Memory Details
Initial
R/W Backup
value
0 R/W -
109
1
2
3
4
5
6
7
8
9
10