Vision Fitness E3100 Assembly Manual page 2

To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding, find

your new Fitness Cycle's serial number located on the front axle tube, and enter here:

Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be

sure to read your Owner's Guide before using your new Fitness Cycle.

If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12

NOTE:

It is recommended that you apply grease to the threads of each screw as you assemble your Fitness Cycle to prevent

loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before

completely tightening any ONE screw.

STEP

A s s e m b l y

G u i d e

E3100

AND

UPRIGHT FITNESS CYCLES

E3000

STEP

E3000