Vision Fitness E3000 Assembly Instructions Manual
Hide thumbs
Also See for E3000:
- Assembly manual (9 pages) ,
- Owner's manual (64 pages) ,
- Owner's manual (39 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
E3000
ASSEMBLY INSTRUCTIONS
To avoid possible damage to this Fitness Cycle,
please follow these assembly instructions.
Carefully remove all its parts from the box,
lay them out and review the parts list.
If any parts are missing, please call 1-800-335-4348, Ext 12
Before proceeding, find your Fitness Cycle's serial number,
located on the underside of main frame, and enter here:
Refer to this number when calling for service.
I T
A L L
S T A R T S
W I T H
A
V I S I O N
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vision Fitness E3000
Summary of Contents for Vision Fitness E3000
- Page 1 E3000 ASSEMBLY INSTRUCTIONS To avoid possible damage to this Fitness Cycle, please follow these assembly instructions. Carefully remove all its parts from the box, lay them out and review the parts list. If any parts are missing, please call 1-800-335-4348, Ext 12 Before proceeding, find your Fitness Cycle’s serial number,...
- Page 2 E3000 Parts Diagram...
- Page 3 E3000 Parts and Assembly VISION FITNESS E3000 Parts Description Part # Description Count Dimensions Rear Foot and Seat Support Parts Rear Foot Assembly #805 Rear Foot Attachment Bolts 20mm L x 8mm D Seat Parts Seat Post #705 Seat Handlebar Support Parts...
- Page 4 E3000 Assembly Step 2 • Seat and Seat Post 1: Slide the Seat Post (10) through the Rubber Seat Post Cover (606) and into the frame Seat Post receiver tube. The Seat Post numbers should be facing the right or seat pin side of the Fitness Cycle.
- Page 5 E3000 Assembly Step 3 • Console Mast and Top Cap 1: Remove the Top Cap Screws (618) that hold the Top Cap (616) to the Frame. Remove the Top Cap (616). NOTE: The two Phillips head bolts (14) in front of the Top Cap (616) are for mounting the waterbottle cage.
- Page 6 E3000 Assembly Step 4 • Handlebars 1: Bolt the Handlebars (119) to the Console Mast using the two Allen Bolts (805) and Lock Washers (804). Step 5 • Pedals 1: Attach the left and right Pedal Straps (90) to the matching pedals (706).
- Page 7 E3000 Final Assembly Step 6 • Cable Connection 1: Locate the Tension Knob (623) and Upper Tension Cable (130). Turn the Tension Tension Knob (623) to position 1. Reach inside the opening of the knob Console Mast (9) and connect the Upper Tension Cable (130) to the Lower Cable (66) hook-slide on the end of the Lower Magnet Shift Cable (66), as shown in the accompanying illustrations.
- Page 8 621-D East Lake Street P.O. Box 280 Lake Mills, WI 53551 (920) 648-4090...
Need help?
Do you have a question about the E3000 and is the answer not in the manual?
Questions and answers