Table of Contents
Advertisement
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Power on only
Network Standby
– The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Off
•
On
•
Auto
― The
― If
Off
― If
•
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•
•
Network Standby
This feature keeps the network power on when the product turns off.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to
the display.
The message
No Signal
will appear if no source device is connected.
Off
The message
No Signal
will appear if no input signals are detected.
Standby Control
option is only enabled when
No Signal
is displayed although a source device is connected, check the cable connection.
No Signal Message
is set to Off, the
If this is the case, set
No Signal Message
On
Power-saving mode will activate if no input signals are detected.
Power on
only: Set the power button to turn on the power.
Power on and
off: Set the power button to turn on/off the power.
Off
/
On
Source
is set to PC,
DVI
or HDMI.
No Signal
message does not appear.
to On.
139
Advertisement
Table of Contents
Troubleshooting
