Standby Control; Power Button; Network Standby - Samsung DM82D User Manual

Power Control
Auto Power On
PC Module Power
Max. Power Saving

Standby Control

Power Button

Power On Only

Network Standby

- The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Off
•
On
•
Auto
Off
•
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•
•
Network Standby
This feature keeps the network power on when the product turns off.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
Off
No Signal
The message will appear if no input signals are detected.
― The
Standby Control
option is only enabled when
― If
No Signal is displayed although a source device is connected, check the cable connection.
― If
No Signal Message is set to Off, the
No Signal Message
If this is the case, set
On
Power-saving mode will activate if no input signals are detected.
Power On Only: Set the power button to turn on the power.
Power On/Off: Set the power button to turn on/off the power.
Off On
/
Source is set to PC, DVI, HDMI1, HDMI2,
No Signal
message does not appear.
to On.
HDMI3 or DisplayPort.