Table of Contents
Advertisement
Power Control
MENU m →
System
→
Power Control
→ ENTER E
Power Control
Auto Power On
Max. Power Saving
Standby Control
Network Standby
Power Button
Power On Only
― The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
•
Off
Max. Power Saving
Off
Conserve power by turning off PC monitor when PC is not used for certain time.
•
Off
On
On
Standby Control
Off
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
•
Off
The message
― If
No Signal
― If
No Signal Message
If this is the case, set
•
On
Power-saving mode will activate if no input signals are detected.
/
On
/
On
No Signal
will appear if no source device is connected.
No Signal
will appear if no input signals are detected.
is displayed although a source device is connected, check the cable connection.
is set to Off, the
No Signal
message does not appear.
No Signal Message
to On.
95
Advertisement
Table of Contents
