Table of Contents
Advertisement
10
When done, select
OK
at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
11
When the connection has been verified, the
connection are setup and ready to
WPS(PBC)
How to set up using WPS(PBC)
If your router has a
WPS(PBC)
button, follow these steps.
1
Set
Network type
to
Wireless
from the
2
Select WPS(PBC), press E, and then press E again.
3
Press the
WPS(PBC)
button on your router within 2 minutes. Your product automatically
acquires all the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
"Your wireless network and Internet
use." message appears.
Network Settings
page.
129
Advertisement
Table of Contents
Troubleshooting
