Connecting To A Video Device; Connection Using An Hdmi-Dvi Cable - Samsung DM65E-BC User Manual

Connecting to a Video Device

― The appearance may differ depending on the product.
• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
• You can connect a video device to the product using a cable.
― Connecting parts may differ in different products.
― If using the remote control, connect an external device and press SOURCE on the remote
control to select the device.
― If using touchscreen control mode, connect an external device. Next, touch and hold on
the screen when the product is turned on to display the administrator menu. Select
from the administrator menu.

Connection Using an HDMI-DVI Cable

― The appearance may differ depending on the product.
― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI
cable. To resolve this, additionally connect an audio cable to the audio ports on the product
and video device.
― After connecting a video device to the product with an HDMI-DVI cable, make sure to
configure the settings as shown below to enable the video and audio from the video device.
―
Sound → set HDMI Sound to AV(HDMI)
―
Picture → set each screen mode to
―
System → General → set HDMI Hot Plug
― Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
Videos/Images under Picture Mode
to On
Source
POWER
HDMI IN
RGB / DVI / HDMI / AUDIO IN
POWER
DVI IN /
MAGICINFO IN
55