Samsung DM65E-BC User Manual page 67

7
Enter the information required to approve the device.
• Device Name: Enter the device name.
• Device Group: Select to specify the group.
• Location: Enter the current location of the device.
― Pressing the INFO button on the remote when a network schedule is running will display
the details of the schedule. Check that the correct device has been selected by viewing the
device ID in the details.
8
Select the All menu to check that the device has been registered.
9
When the device is approved by the server, the schedule registered in the selected group
will be downloaded to the device. The schedule will run after it is downloaded.
― For further details on how to configure a schedule, refer to the <MagicInfo Premium Server
user's manual>.
― If a device is deleted from the list of devices approved by the server, the device will reboot to
reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
• When connecting to the server for the first time, the time on the product is set using the
GMT time of the region where the server is installed.
• The time on the product can be changed from the server as shown in step 3.
• Turning the product off and then on again will restore the time setting on the product to
the last time that was set from the server.
― For further details on how to manage the time (scheduling, holiday management, etc.), refer
to the <MagicInfo Premium Server user's manual>.
67