Table of Contents
Advertisement
By using DVR-ID button of remote controller, Remote controller can be matched with
SYSTEM- ID, or if SYSTEM- ID is 00, system-ID is not displayed and system accept key from
remote controller.
If SYSTEM- ID color is Yellow, the system accepts remote-controller key input.
If SYSTEM- ID and Active-ID are not matching, SYSTEM- ID color will be Red and the system
does not accept remote-controller key input.(No beep)
How to match SYSTEM- ID by remote controller
(1) Press DVR-ID button of remote controller.(You can hear short double-beep.)
(2) Then, press desired System-ID by using 2 numeric button. (E.g. 02 or 03 or 01)
4.2.7.4. USER
There are two fixed users such as ADMIN and NETUSER. Their values of authority are already set and
unchangeable like the below picture. Additionally, you can create Max. 4 more authorized accounts,
and you also give limited authority to control DVR system by checking each box.
● USER – There are two unchangeable user IDs (ADMIN, NETUSER), and additionally you can add four
additional USERs by your own.
● PASSWORD – Only passwords for ADMIN and NETUSER are set to '0000'. When you create a new
account, make sure that you have to enter new PASSWORD. And don't forget the Password.
● SETUP – Check this box then the user is authorized to go into setup menu
● DVR – Click SET button then DVR setup detail will pop up. You can give authorities of REC,
PLAY(SEARCH), BACKUP and PTZ to each user as you wish.
● NETWORK – Check this box then the user is authorized to access to DVR via network (Web, CMS)
● TIME OUT – When this is set to ON, LOGIN window will re-appear after entered time from any
signal input. If you want to log out, you need to go to MENU and select LOG OUT like right picture.
● MONITOR – First select ON to give monitoring authority to each user. Then click CH button to
Select monitoring channel the user can access.
Not working
R:01
R:02
Working
R:03
Not working
- 38 -
Active ID : 02
Advertisement
Table of Contents
