Table of Contents
Advertisement
4.2.4.7. ALARM SCHEDULE
If you select the date or time you want , the Buzzer goes off, after the value of alarm-out was chosen
as any value in each sub menu of EVENT, when the related things happen during the selected times.-
4.2.4.8. FTP SCHEDULE
Arrange schedule for FTP event transfer to be activated. This function will work only on selected day
and time according to your setup.
4.2.4.9. MISC
● PRE-REC TIME – Enter recording time (0~30sec) before the time when event occurs
● POST-REC TIME – Enter recording time (0~120sec) after the time event occurs.
● BUZZER – Buzzer will be sounded when alarm is out , if ON is selected.
● DWELL TIME – Enter the duration time of alarm out when event occurs.
● EVENT POPUP – When event happens, the channel will pop up if ON is selected.
● POPUP SEQUENCE TIME – Switching time to display popup channels
Note> If event occurs during dwell time of another event, dwell time will be ignored and
Newer event will pop up.
- 30 -
Advertisement
Table of Contents
