Summary of Contents for LAFI-SA IVE-1004D-1008C-1016C
- Page 1 Real time Digital Video recorder IRIS-U DIGITIAL VIDEO RECORDER IVE-1004D/1008C/1016C IVE-1004D-1008C-1016C (4/8 channel) USER'S MANUAL USER’S MANUAL USER'S MANUAL RoHS WWW.LAFI-SA.COM - 1 -...
-
Page 2: Important Safety Instructions
Important Safety Instructions. Read and Keep these instructions Heed all warnings Follow all the instructions Do not use this apparatus near water and Clean only with dry cloth Do not install near any heat sources such as radiators, heat registers, or other apparatus that produce heat Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. -
Page 3: Table Of Contents
CONTENTS 1. Product Overview 1.1 Packing Contents ··············································································· 1.2 Front ··············································································· 1.3 Rear ················································································ 1.4 Remote Controller ················································································ 2. Installing Product 2.1 Installing HDD ················································································· 2.2 Connecting Camera and Audio Device ························································· 2.3 Connecting Monitor ·············································································· 2.4 Connecting Optional Device ····································································· 2.5 Connecting Network ················································································... - Page 4 4.2.7 System ·························································································· 4.3 Search ························································································ 4.3.1 Search by Time ················································································ 4.3.2 Search by Calendar ·········································································· 4.3.3 Search by Event ··············································································· 4.3.4 Go to First ················································································ 4.3.5 Go to Last ················································································ 4.3.6 Search mode ················································································ 4.4 Function ························································································· 4.4.1 PTZ ·························································································...
-
Page 5: Product Overview
1. Product Overview - 4 -... -
Page 6: Packing Contents
1.1 Packing Contents Once opening the product box, please check out whether there are all contents as follows and there are some visible damages. If any of these items is missing or damaged, contact your supplier immediately before using the product. DVR product Remote control &... -
Page 7: Front
1. 2 Front USB device(mouse, memory stick, HDD) can be USB PORT connected LED indicators that show power, recording & network status 1.3 REAR DC 12V POWER Connect Power Adaptor included in Box ETHERNET 10/100MB LAN port USB Devices(mouse, memory stick, HDD) can be USB PORT connected 485 PORT... -
Page 8: Remote Controller
1.4 Remote controller 1) REC : Record button 2) DVR-ID 3) Number button 4) AUDIO : Audio ON / Mute 5) BACKUP : Back up recorded data to other device 6) MENU : Go to ‘MENU’ mode to setup values 7) OSD : Show or Hide OSD 8) PTZ : Control Pan/Tilt/Zoom camera. -
Page 9: Installing Product
2. Installing Product - 8 -... -
Page 10: Installing Hdd
2.1 Installing HDD 1 HDD can be installed inside the product and install HDD before you start the product. Be careful not to be harmed by sharp edges of the product. (1) Loosen screws on the back to detach the (2) Lift the end of top cover and pull out top cover. -
Page 11: Connecting Monitor
Connecting monitor Connect spot and VGA port in DVR to monitor Spot (BNC) 2.4. Connecting Optional device You can connect and control the PTZ device supporting RS-485 communication. Connecting Network Connect LAN cable (RJ45) to Ethernet port on rear of the product. LAN cable (RJ45) INTERNET 2.6 Connecting power supply... -
Page 12: Operation
3. Operation - 11 -... -
Page 13: Turning On
PLEASE REMIND THAT THE HDD SHALL BE INSTALLED AT FIRST BEFORE USING DVR. 3.1 Turn on Please connect Power Adaptor included in Box into power DC terminal. There is no separate power switch, so The DVR shall turn on automatically as soon as it is connected. - Page 14 3.3.1 Icons in Live Display Mode In Live display mode, icons will be indicated on the screen to notify the system mode or status. Below are the icon categories, which are indicated on the monitor. Icon to be shown Icon to be shown at right-upper corner on each channel at left-bottom corner on full screen.
- Page 15 Play speed -◀◀ / ▶▶ x8, x32, x128 supported How to use Playback bar - Play starts with PLAY button. If you press PLAY button in LIVE mode, or select one thing in SEARCH SUB-MENU, DVR will prepare to play the recording data from the point you selected - Playback mode changing To display different screen mode, click the Monitor Icon on screen and select different mode.
-
Page 16: Other Functions Of Remote Controller
SYSEM-ID = 01, Request-ID = 01 Status means that the DVR can be operated or not with the remote controller. SYSTEM-ID means the number of remote controller ID of DVR. Request –ID means that the number of Remote controller you have got. If you like to control the DVR with the remote controller, the value of SYSTEM _ID is the same to that of Request-ID. -
Page 17: Mouse
3.4.6. PIP mode (picture in picture) In case of full screen display mode, you can see other camera with a small window. (1) Press PIP button of remote controller. (2) If you press PIP button again in PIP mode, the position of two screens will change each other. ‘PIP’... -
Page 18: Mobile Viewer
Some kinds of USB mouse may not be compatible with product. 3.5.1 Change screen mode Left button of mouse is for selecting an item. Right button of mouse is usually for canceling menu table or going to former menu mode. Additionally, if you press right button of mouse on basic screen, following window will appear. - Page 19 3.6.2. Mobile viewing method through mobile-viewer application on smartphones. This mobile viewing method is using our own mobile viewer software through smart phones such as iPhone, Android, Symbian and blackberry and you can get much more frames than above browsing method.
-
Page 20: Menu
4. MENU - 19 -... -
Page 21: How To Display Menu Window
4.1. HOW TO DISPLAY MENU WINDOW Please press MENU button in Remote controller or Click right button of Mouse anywhere. The menu windows will be shown up the left side of the screen as the below. SETUP FUNCTION SEARCH 4.1.1. SETUP DISPLAY CAMERA RECORD... -
Page 22: Display
4.2.1 DISPLAY When you click Display Icon, display menu is divided into 4 sub-menus; OSD, LIVE-SEQ, DEINTERLACE, and VGA RESOLUTION 4.2.1.1. OSD You can select which is displayed in the screen with choosing each icon. ● CAMERA NAME - Show camera name on screen. ●... -
Page 23: Camera
● VGA/TV – Adjust OSD margin automatically according to VGA/spot output. After setting OSD, you should OSD OFF icon in MENU to hide OSD you selected. 4.2.1.2. DISPLAY-LIVE-SEQ(FULL) - Set switching time to display a full screen in sequence. - CH : Input desire channel no. - TIME : Input desired switching time - DEFAULT CH : Change to factory default value - ALL TIME : same time is input to all channel. - Page 24 4.2.2.1. GENERAL ● NAME – Enter each camera name. Maximum 15 digits in English can be input. ● COVERT – Show or Hidden the camera in Live mode. ON: To covert, OFF: To show the camera ● AUDIO – Select connected audio channel. ●...
- Page 25 (1) Select camera. (2) Select Icon. (3) PTZ control screen of the camera will appear. (4) Move pan, tilt, zoom in/out to desired point. (5) Click Advance icon or Press ENTER Key in remote controller to save Click any other position on screen by mouse or press MENU Key to cancel. (6) if you like to cancel the setting, please click the CLE icon of the channel will be cleared.
-
Page 26: Record
4.2.2.7. POSITION ● CAMERA – Select camera to adjust position. ● LEFT/RIGHT– Move camera position to LEFT or RIGHT in screen. ● DEFAULT – Set all values to factory default. 4.2.3. RECORD When you click Record Icon, Record menu is divided into 4 sub-menus;... - Page 27 Record Quality Picture Quality Disk Space Need BASIC Least NORMAL Fair Medium HIGH Good BEST Excellent Most ● ALL All channels would be changed according to selected resolution or quality or frame rate. ● REMAIN XXX / XXX / XXX - Indicate the remaining frame number to record based on each resolution.
-
Page 28: Event
4.2.3,3. WATER-MARK If you select ON in water-mark window, the recording data will include water-mark. Data Verification can be checked in the backup-viewer whether falsified or not. 4.2.3.4. MISC ● OVERWRITE If you select ON in overwrite, the oldest recorded files will be overwritten by newly recorded data when HDD becomes full. - Page 29 ▶ CLEAR ALL – Cancel the whole area. ● SENSITIVITY – Set the sensitivity of motion detection. Sensitivity degree : 0 < 1 < 2 < ….. < 9 ● ALARM-OUT – Set the alarm-out when motion is detected. 4.2.4.2. SENSOR ●...
- Page 30 Event E-mail : Select ALL TIME or SCHEDULE to use Email notification. Event type : Select Event type to notify by email SENDER ID : Input DVR name or letters E-mail address : Input your email address to receive event information from DVR. For example : anyone@gmail.com Ex) Email message From : DVR@dvr.com...
- Page 31 4.2.4.7. ALARM SCHEDULE If you select the date or time you want , the Buzzer goes off, after the value of alarm-out was chosen as any value in each sub menu of EVENT, when the related things happen during the selected times.- 4.2.4.8.
-
Page 32: Storage
4.2.5. STORAGE 4.2.5.1. HDD FORMAT You should surely format HDD first of all, after that HDD can be used for recording (1) Select HDD to format and Click FORMAT icon. (2) After formatting, system will reboot. It takes less than 3 minutes to format 2TB HDD. 4.2.5.2. - Page 33 (2) ADSL(PPPOE) If you use ADSL model, select ADSL and enter PPPOE ID and PASSWORD. If you don’t know ID and Password, please contact your ADSL service provider. 4.2.6.2. STREAM It is possible to set 2 different resolution, quality, fps for recording and network transmission. If you select “ON”...
- Page 34 4) Click TEST to update the information to DDNS server. 5) After success of upgrade, STATUS shows ddnscctv.com OK Using DDNSCCTV.COM, NO-IP.COM or DYNDNS.COM You should first register an account on the web site at www.ddnscctv.com, www.dyndns.com www.no-ip.com ● SERVER - Choose server type. ●...
- Page 35 3) Fill in E-mail address, password, name and etc.. Then, click Submit button. 4) Input domain name you wish to create and click Request Domain button. Domain name can be created with combinations of alphabets, numbers and marks. (You must not put a mark on first letter of domain name.) 5) Click Logout button after domain name has been successfully registered.
- Page 36 DDNS setup on DVR 1) Enter SETUP NETWORK DDNS 2) Select DDNSCCTV.COM (3 options : DDNSCCTV.COM, NO-IP.COM, DYNDNS.COM) 3) Input E-mail address & password you registered at http://ddnscctv.com on USER ID and PASSWORD. 4) Input domain name you registered at http://ddnscctv.com on HOSTNAME.
-
Page 37: System
4.2.6.5. ACCESS LIST Registered IP address is allowed to access DVR. If you set at least one IP address, then only entered Client IP address(es) would be allowed to access DVR. However, if you do not register any client IP address, any clients can access DVR. 4.2.7. - Page 38 4.2.7.2. TIME ● DATE FORMAT – Select Date format. ● TIME FORMAT – Select type of time indication ● TIME ZONE – Select your area to make adjustment of time zone. Please remind that the system will reboot, when you change the time zone. ●...
- Page 39 By using DVR-ID button of remote controller, Remote controller can be matched with SYSTEM- ID, or if SYSTEM- ID is 00, system-ID is not displayed and system accept key from remote controller. If SYSTEM- ID color is Yellow, the system accepts remote-controller key input. If SYSTEM- ID and Active-ID are not matching, SYSTEM- ID color will be Red and the system does not accept remote-controller key input.(No beep) How to match SYSTEM- ID by remote controller...
- Page 40 4.2.7.5. UPGRADE If you open this menu, you can see the current firmware version of DVR. If you would like to upgrade firmware of DVR, please follow the below steps. If you click upgrade icon, the small upgrade window will pop up There are two ways;...
-
Page 41: Search
4.2.7.5.2. Network upgrade Please select network upgrade in upgrade window (1) Select UPGRADE , then small window will appear. (2) Select NETWORK UPGRADE and press ENTER button. (3) Check out whether Server IP and FILE NAME are correct. If shown information is wrong, correct SERVER IP and FILE NAME and press ENTER button to input new information by text input Dialog box. -
Page 42: Search By Time
4.3.1. SEARCH BY TIME (1) Enter desired date and time to search for. (2) Then, move the pointer to OK and press ENTER button. It is the start point to play back the data. 4.3.2. SEARCH BY CALENDAR (1) If you select SEARCH BY CALENDAR, the calendar will appear as the below. ▲▼... -
Page 43: Go To First
4.3.4. GO TO FIRST Play starts from oldest recorded data. 4.3.5. GO TO LAST Play starts from latest recorded data. 4.3.1. SEARCH MODE Using search icons on the top, you can play, pause, rewind and fast forward. (For more details of description of icons, please refer to page 13) If you click you will see 5 search sub-menus + “Show Hidden CH”... -
Page 44: Function
4.4. FUNCTION FUNCTION menu is divided into 4 sub-menu; PTZ, AUDIO, BACKUP, and LOG VIEW 4.4.1. PTZ If you press button of remote controller, or select PTZ in Function Menu, screen will be changed to FULL screen mode and you can control PTZ camera. If you press advance Icon in PTZ window, PTZ- ADVANCE window will pop-up. -
Page 45: Audio
NOTE - The PRESET-positions are set by PRESET menu [MENU SETUP CAMERA PRESET] - The SCAN-lists are set by SCAN-POINT menu [MENU SETUP CAMERA SCAN-POINT] OSD MENU If you click OSD MENU icon in case that Camera itself has OSD function, The OSD will be shown in accordance with Camera’s OSD. -
Page 46: Log View
4.4.4. Log view You can see the system log status or save it into USB memory and see it in PC. ● EVENT TYPE – Select desired event type ● FROM – Enter starting date & time ● TO – Enter ending date & time ●... -
Page 47: Specification
Specification Specification 4 Channel 8 Channel Video(BNC) INPUT Audio(RCA) Sensor Video VGA, Spot out OUTPUT AUDIO(RCA) Alarm PORT 2 x USB ports, 1 x PTZ(RS-485) ports and Ethernet Display Mode 1,4 & PIP, POP 1,4,9 & PIP, POP Live Digital Zoom Digital X2 Zoom Resolution NTSC - 720*480, PAL - 720 * 576... -
Page 48: Trouble Shooting
Trouble shooting In the event of a product malfunction, please check the following list for a usual and possible solution before requesting service. 1. Product is not turned on. Check out whether the power is being supplied well. 2. Product continues displaying “Loading” or “Starting UI….” Check the product can boot without HDD If product continues displaying “Loading”...