Table of Contents
Advertisement
2.1 Installing HDD
1 HDD can be installed inside the product and install HDD before you start the product.
Be careful not to be harmed by sharp edges of the product.
(1) Loosen screws on the back to detach the
top cover.
(3) To install HDD, you should upside down
the set, and HDD can be installed onto
bottom with screw.
(5) Insert top cover to product as side
picture and tighten screws again.
2.2 Connecting camera and audio device
Connect video signal cable (BNC type) into VIDEO IN port on rear of the product.
Connect RCA cable from microphone into AUDIO IN port on rear of the product.
Connect RCA cable into AUDIO OUT port on rear of the product and into audio device.
(2) Lift the end of top cover and pull out
from product.
(4) Connect HDD Power and cable to HDD.
Camera input
Audio IN
Audio OUT
- 9 -
2
1
Advertisement
Table of Contents
