Table of Contents
Advertisement
● VGA/TV – Adjust OSD margin automatically according to VGA/spot output.
After setting OSD, you should OSD OFF icon in MENU to hide OSD you selected.
4.2.1.2. DISPLAY-LIVE-SEQ(FULL)
4.2.1.3. DEINTERLACE
There is two; ON and OFF
4.2.1.4. VGA RESOLUTION
Select appropriate VGA resolution according your VGA monitor.
(There are three kinds of VGA resolutions; 800*600, 1024*768, 1280*1024)
4.2. 2. CAMERA
- Set switching time to display a full screen in sequence.
- CH : Input desire channel no.
- TIME : Input desired switching time
- DEFAULT CH : Change to factory default value
- ALL TIME : same time is input to all channel.
NOTE
: The time is second and maximum 99 second for
switching time can be entered.
Please select "ON" if you don't want to get
interlaced video with D1 resolution, then video
quality at D1 in playback will be better than setting
"OFF".
When you click Camera Icon, Camera menu is
divided into 7 sub-menus;
GENERAL, PRIVATE ZONE, PTZ, PRESET, SCAN
POINT, COLOR, and POSITION
- 22 -
Advertisement
Table of Contents
