LAFI-SA IVE-1004D-1008C-1016C User Manual page 38

4.2.7.2. TIME
● DATE FORMAT – Select Date format.
● TIME FORMAT – Select type of time indication
● TIME ZONE – Select your area to make adjustment of time zone.
Please remind that the system will reboot, when you change the time zone.
● TIME SYNC
This function is for synchronizing the time of DVR periodically
with that of the connected server by every hour.
● SERVER IP – Enter IP address of time server.
Select TEST and press ENTER button to check if time sever is working.
If this function is selected, DVR refer the time of Time zone every one hour,
And then time of DVR will be changed to match that of time server.
E.g. time.kriss.re.kr (www.time.kriss.re.kr
● CHANGE TIME – Time will be changed by manual if the time server is not selected.
4.2.7.3. INPUT DEVICE
● SYSTEM-ID – Input the number that you want to register in this DVR.
● KEYBOARD – DVR system can be connected with control keyboard.
● KEY-TONE – Beep whenever button is pressed if ON is selected.
How to set up System-ID status
System-ID status shows whether the system will accept key from remote-controller or not.
SYSTEM-ID is used when user operates several systems with one remote controller.
SYSTEM- ID will be displayed when SYSTEM- ID is other than 0(zero).
X)
- 37 -