Technical Data; Safety Instructions - Hilti ST-SG 5.5 Operating Instruction

4. Technical data

Right of technical changes reserved.
Attachment
Weight
Length
Contact pressure
Screw capacity (no. of screws)
For use with long metal con-
struction screws
Min. length
Screw shank diameter
Head diameter
Drive type
Max. washer diameter
Max. washer thickness

5. Safety instructions

5.1 General power tool safety warnings
5.1.1 Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
b) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
c) Use safety equipment. Always wear eye pro-
tection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will reduce
personal injuries.
5.1.2 Power tool use and care
a) Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed. Use of
the power tool for operations different from those
intended could result in a hazardous situation.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070746 / 000 / 00
ST-SG 5.5 / ST-SG 6.5
0.38 kg
135 mm
30 N
1
ST-SG 5.5
55 mm
Max. 4.75 mm
Max. 18 mm
8 mm, / ", / ", 11 mm
29 mm
12 mm
b) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
c) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the
hands of untrained users.
5.2 General power tool safety warnings
a) Observe the operating instructions and the safety
rules contained for the attachment and the screw-
driver used.
b) Insert the screw only when the screwdriver is not
running.
c) Do not hold the attachment at the area of the
depth gauge.
d) Each screwdriving stroke must be completed
in full. Interruption of the stroke or reduction
of pressure half way through the screwdriving
operation may lead to malfunctions.
e) Wear eye protection, especially when working
overhead.
ST-SG 6.5
55 mm
Max. 5.3 mm
Max. 18 mm
8 mm, / ", / ", 11 mm
29 mm
12 mm
en
9