Ap4.9 Function Settings; Ap4.9.1 Dhcp - Nera Inmarsat-c Service Manual

AP4.9 Function settings

AP4.9 Function settings

AP4.9.1 DHCP

When a DHCP server is connected to the LAN, IP address and subnet mask are
automatically assigned by following steps below.
Nera C
Procedure
1. Press [F8][2] to open "Sy stem Setup" menu.
2. Select "Network Setup", followed by [Enter].
3. Select "Network", followed by [Enter].
4. Select "DHCP", followed by [Enter].
5. Select "ON", followed by [Enter].
6. Press [Esc] to show [Update].
7. Select "Yes", followed by [Enter]. The message "Press ESC key to Restart
Nera C." Appears.
8. Press [Esc]. The system automatically restarts and new settings are loaded.
9. Check IP address allocated to Nera C after setting.
After setting, check the connection between Nera C and PC by using
"Ping" command. See page AP4-32.
AP4-14