Terminal Setup: [F8]-4; Egc Setup: [F8]-5; Auto Mode Setup: [F8]-6 - Nera Inmarsat-c Service Manual

4. Terminal Setup: [F8]-4

Item
YY - MM - DD
Date Disp.
MMM - DD - YY
Form
DD - MMM - YY
Currency Unit SDR to OTHER
Screen Saver ON/OFF
Window Color
Setup
Window Color
Default Color

5. EGC Setup: [F8]-5

Item
Additional Position
Navarea
Fixed Area
Receive EGC
Area
Way point
Station Code
NAVTEX
Ice Report to
QRU (no message)

6. Auto Mode Setup: [F8]-6

Item
Auto Log
ON/OFF
Print
Receive Alarm ON /OFF
Contents
Setting for the way of the data display such as the one
in the status display and the time stamp for the Log
menu.
Setting for the currency unit registered by the LES list.
The communication rate is shown in the Transmit
Message (F3-1).
ON/OFF setting for the Screen Saver. When it is set to
ON, the screen saver appears if the system has not
been used for 10 minutes.
Setting for the window color.
Setting for the window color. Returns the color to the
default.
Contents
Area set by Pos.
Inputs Navarea
"Fixed Area" is where you enter fixed areas (max.
3) for chart correction service. However, this service
is not yet available; enter no data.
ON/ OFF setting for the WP area designated by the
navigational system.
Selects NAVTEX station.
ON/ OFF setting for the receiving message type.
Contents
Description
Description
When set to ON, Log is automatically printed out
every time the date is changed.
ON/ OFF setting for the message receiving alarm.
When receiving the message, the alarm is released
to IC-215 and the ALARM unit. All alarm is stopped
by the operation of [F10]:STOP ALM of IC-215.
4-5
4.1 System menu (F8)
Description