General
With a serial printer connected to the PRINTER port on the Main
control Unit, it is possible to print out lists and settings from the
Saturn B terminal.
The printer must be set as follows:
•
4800 bps
•
No parity
•
8 data bits
•
1 stop bit
See also
Printing a full Set of Lists:
1
Select the main menu ALARMS
AND MESSAGES (3-):
2
Press SHIFT + PLAY
to start printout:
Printing Specific Lists:
Press SHIFT + PLAY when in functions as listed:
Function
(10) SHORT NUMBER LIST
(30) ACTIVE ALARMS
(31) INFO LOG
(32) CLEAR CAUSE LOG
(33) TERMINAL STATUS
(4-) SYSTEM INFORMATION
(70) CONFIGURE PORTS
(89) ENHANCED SETUP
Saturn Bm – Chapter 3. Configuration
Printout of Lists and Settings *
"Various
Configurations" in this chapter.
3
FUNC
GHI
2
PLAY
SHIFT
DEF
Heading
"Short number list"
"Active alarms"
"Event log"
"Clear cause log"
"Status"
"System info"
"Configuration info"
"Enhanced configuration info"
ON
3.23