Nera Inmarsat-c Service Manual page 104

Note)
1. When the Nera C terminal for PC is used, the installation is automatically
started by opening "F15PC.EXE".
2. Change setting "Active Port" of [F8] [2] of IC-215 to "All".
3. Some item of [F8] cannot be set by PC terminal.
4. Commercial printer for Windows and PP-510 can be connected to "Printer" port on
PC. Printer setting is made through "Printer setting" menu ([F1]-8).
With the commercial printer, error messages, such as "WARNING, TROUBLE:
XXX" are not printed out.
Program disks contain following files. The file size is reference only.
File
_inst32i.ex_
_isdel.exe
_setup.1
_setup.lib
Disk1.id
Following files are automatically created every time F15.EXE is executed.
- F15PC.LOG: Communication log file ([F6]-4), saving 32 logs.
- F15PC.REP: Settings in "Message, Data Report" ([F5]-1,2) menu from terminal unit
- F15PC.RXM: Receiving message ([F6]-2 and –3) log files, saving 32 logs or 32 kB.
- F15PC.TXM: Sending message ([F6]-1) log file, saving 5 logs.
- F15PC.DAT: Includes following settins;
Editor Setup ([F8]-3), Terminal Setup ([F8]-4), Auto Mode Setup ([F8]-6),
E-Mail Setup ([F8]-7), Directory ([F8]-8), Station List (F8-9-1),
LES List ([F8]-9-2), E-Mail Service List ([F8]-9-5) and Printer Setting ([F1]-8)
When "Windows printer"
is selected.
Terminal program for PC
Size
288 k
8 k
407 k
200 k
1 k
"Printer setup" appears, select to printer.
File
Setup.exe
Setup.ini
Setup.ins
Setup.iss
Setup.pkg
6-5
6.2 Program files
Size
45 k
1 k
80 k
1 k
1 k