Nera Inmarsat-c Service Manual page 172

Procedure
1. Press [F8][2] to open "Sy stem Setup" menu.
2. Select [Network Setup], followed by [Enter].
3. Select Network , followed by [Enter].
4. Select "I P Address" , followed by [Enter].
5. Set "I P address" , followed by [Enter].
6. Select "Subnet Mask" , followed by [Enter].
7. Set "Subnet Mask" , followed by [Enter].
8. Press [Esc] to show "Update" .
9. Select "Yes" , follow ed by [Enter] to update the setting. The message "Press ES C
key to Restart Nera C". appears.
10. Press [Esc]. The updating starts automatically.
4. Settings on PC
Perform network settings on the PC. For details refer to the PC's owner's manual.
For example)
- IP address
- Subnet mask
After setting, check the connection between Nera C and PC by using
"Ping command". See page AP4-32.
: 172.31.16.2
: 255.255.0.0
AP4-10
AP4.8 Connection and setting