Ap4.8.2 Connection Of Multiple Pcs - Nera Inmarsat-c Service Manual

AP4.8.2 Connection of multiple PCs

Received messages are stored in the Nera C and retrieved by one of the PCs in
the network. Once the message is transferred, it is no longer retrieved.
Nera C
1. Parts required
- Hub (When 100BASE-T PC is connected, a switching hub is needed.)
- 10BASE-T or 100BASE-T straight LAN cable
- PC (with LAN port or LAN card)
2. Connection
Using the straight LAN cable, connect Nera C and LAN port on the PC to the
Hub.
3. Setting on Nera C
Default settings of IP address and subnet mask are as below. Change these values if
necessary.
- IP address
- Subnet mask
Procedure
Refer page AP4-9 "3. Setting on Nera C" .
4. Setting on PC
Make network settings on the PC. For details refer to the PC's owner's manual.
For example)
- IP address : 172.31.x.x
- Subnet mask: 255.255.0.0
Note)
IP address assigned to the PC is from "172.31. 0.1" to "172.31.255.254"
except for "172.31.16.1".
After setting, check the connection between Nera C and PC by using
"Ping" command. See page AP4-32.
: 172.31.16.1 (Default)
: 255.255.0.0 (Default)
Note)
AP4-11
AP4.8 Connection and setting
Note)See page AP4-26