Advertisement
FIGURE
26
,,
STEP 26:
¯ Route CABLE (25) around PULLEY and undcx the CABLE RETAINING CLIP on FRONT UPILIGttT (1) a.~ sho~'n in FIGURE
26.
¯ Attach the CABLE (25) to the PULLEY BRACKET
(11) using one QUICK LINK (38) as shown in HGURE
¯ SECURELY
tighten the two PULLEYS assembled between the two 1-3/4 X 5-1/4" PLATES (17)..
19
Advertisement
