Advertisement
FIGURE 24
STEP 24:
¯ Route the CABLE (25) under the 3-1/2" PULLEY in the slot on the FRONT UPRIGHT (1) and around the 3-1/2" PULLEY shosrn
on FIGU'KE 24. (NOTE: Make sure CABLE (25) is underneath the CABLE RETAENENG
CLrl,.)
¯ SECURELY
assemble one 3/8 X 2-3/4" BOLT (28) to the UPRIGHT FRAME (1) using two 3/8" WASHERS
(31), and one
LOCK NUT (36). (NOTE: Make sure CA.BLE is between the 3/8 X 2-3/4" BOLT and the 3-1/2" PULI,EY.)
17
Advertisement
