Modules; Line Card And Module Description; Table 17: Supported Slots For Srx1400, Srx3400, And Srx3600 Services; Srx1400, Srx3400, And Srx3600 Services Gateway Module Overview - Juniper SRX1400 Hardware Manual

Table 16: Supported Modules for SRX1400, SRX3400, and SRX3600 Services
Gateways (continued)
Module Name and Number
"I/O Card SRX3K-16GE-TX" on page 36
"I/O Card SRX3K-16GE-SFP" on page 38
"I/O Card SRX3K-2XGE-XFP" on page 40
Network Processing I/O Cards (NP-IOCs)
"Network Processing I/O Card SRX1K3K-NP-2XGE-SFPP"
on page 41
Other Modules
"Routing Engines SRX3K-RE-12-10 and SRX1K-RE-12-10" on
page 43
SRX Clustering Module SRX3K-CRM
Related
Documentation

Eligible Slots for SRX1400, SRX3400, and SRX3600 Services Gateway Modules

Table 17: Supported Slots for SRX1400, SRX3400, and SRX3600 Services Gateway Modules
Module Name and Number
"Services Processing Card
SRX3K-SPC-1-10-40" on
page 33
Copyright © 2016, Juniper Networks, Inc.
SRX1400, SRX3400, and SRX3600 Services Gateway Module Overview on page 29
Eligible Slots for SRX1400, SRX3400, and SRX3600 Services Gateway Modules on
page 31
Installing Common Form Factor Modules In SRX1400, SRX3400, and SRX3600 Services
Gateways
Table 17 on page 31 summarizes the slots in which you can install each module type for
SRX1400, SRX3400, and SRX3600 Services Gateways.
Supported Slots
SRX1400
Front slot labeled (When
1
installed as primary SPC in
conjunction with an
SRX3K-NPC in slot 3)
Front slot labeled (When
2
installed as second SPC)
Chapter 4: Line Card and Module Description
Earliest Supported Junos OS Release
SRX1400 SRX3400
10.4 9.3
10.4 9.3
10.4 9.3
12.1X44-D10 12.1X44-D10
10.2 9.3
(SRX1K-RE-12-10) (SRX3K-RE-12-10)
Not Applicable 10.2
SRX3400
Front slots labeled - and
1 4
rear slots labeled - . We
5 7
recommend that you install
SPCs in rear panel slots to
leave room for IOCs in the
front panel slots.
See note below for
additional restrictions.
SRX3600
9.3
9.3
9.3
12.1X44-D10
9.3
(SRX3K-RE-12-10)
10.2
SRX3600
Front slots labeled - and rear
1 6
slots labeled - . We
7 12
recommend that you install
SPCs in rear panel slots to leave
room for IOCs in the front panel
slots.
See note below for additional
restrictions.
31