Table of Contents
Advertisement
FIGURE 10
STEP 10:
•
Route the threaded end of the 121-3/4" CABLE (12) through the slot of the PULLEY HOUSING then SECURELY assemble one 4-1/2"
PULLEY (10) to the PULLEY HOUSING (3) using two 3/8 X 2-3/4" BOLTS (32), two 3/8" FLANGE SPACERS (33), two 3/8" WASHERS
(30), and two 3/8" LOCK NUTS (31). (NOTE: The CABLE (12) should be routed between the pulley and the retaining bolt as shown in
FIGURE 10.)
31
10
12
33
11
3
33
32 3/8 X 2-3/4"
Advertisement
Table of Contents
