Unit parts Please fold out illustration page at the front 1 Handgun (with built-in pressure gauge) 2 Lever 3 Safety switch 4 Spray lance 5 High-pressure hose 6 Handgun support 7 Nozzle rest 8 Detergent metering valve 9 Cap for detergent reservoir 10 Detergent reservoir 11 Detergent suction-hose with filter 12 Fastening screws for unit cover...
2. Preparing the cleaner for use Unpack the cleaner • When unpacking the cleaner, check the contents of the packaging. If there has been any damage in transit inform the dealer. • Do not dispose of the packaging with the household rubbish, hand it in at the appropriate collection point for recycling.
Danger! Observe the relative safety regulations when using the cleaner at filling stations or other high-risk areas. Caution! Only clean engines in places which have appropriate oil separators (protection of the environment). Caution! Only wash animals with the low- pressure fan jet (see “Selecting the type of spray”).
Protection from sub-zero temperatures Caution! Water which has frozen in the cleaner can destroy parts of it. At best store the cleaner in a heated room during the winter or empty it or rinse it thoroughly with antifreeze. • Empty the cleaner –...
Danger! Before any repair work is undertaken, switch the cleaner off and pull out the power plug. Have electrical components checked and repaired only be authorised Customer Service personnel. For faults which are not identified in this chapter, or when in doubt or when expressly instructed to do so, consult authorised Customer Service personnel.
EU Declaration of Conformity We hereby declare that the equipment described below conforms to the relevant fundamental safety and health requirements of the appropriate EU Directives, both in its basic design and construction as well as in the version marketed by us. This declaration will cease to be valid if any modifications are made to the machine without our express approval.