Dimensions of the single-disc holding brake for motors with shaft heights 100 to 160
Figure 5-3
Mounting a holding brake on the drive end of motors 1PH410⃞ to 1PH416⃞ as an example: Armature disk
mount to a V-belt pulley with key (upper half) or to a toothed-belt pulley for tensioning elements (lower half)
1PH4 Induction Motors
Configuration Manual, (APH4S), 08/2008, 6SN1197-0AD64-0BP1
Motor components
5.3 Holding brake
101