Network - D-Link DSL-226 User Manual

Section 4 - Configuration
This section allows you to change the local network settings of the router
and to configure the DHCP settings. Go to Settings > Network to access this
page.
Router Settings
Router IP Address: Enter the IP address of the router to be identified in your local network.
The default IP address is 192.168.1.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Subnet Mask:
Enter the subnet mask of this interface. The default subnet mask is
255.255.255.0.
Enable Second IP: Enter another IP address of the router to be identified in another
local subnetwork.
Second Subnet Enter the subnet mask of the second interface. The default subnet
mask is 255.255.255.0.
Mask:
Click Save when you are done or click Advanced Settings.
Advanced Settings
DHCP Server Settings
Disable DHCP Select this option to disable the DHCP server. No further configuration
Server: is available. If you choose to disable the router's DHCP server, there
should be other DHCP server on your network or you must configure
the LAN devices' IP addresses manually.
D-Link DSL-226 User Manual

Network

54