Removing a Memory Module
1. Ensure that the Tablet PC is off. To do so, carry out the Shut Down command in the Start menu. (Do not attempt
to remove or install a DIMM module when the system is in Suspend mode or running.)
2. Remove the screws from the cover plate on the back of the Tablet PC and remove the cover plate as shown in
Figure 6-2
3. Gently spread the latches on the socket that lock the DIMM module in place until the DIMM module is loose.
4. Remove the DIMM module from the socket.
The DIMM module is now removed from the Tablet PC. Refer to "Installing a Memory Module" on page 49 to
install a new DIMM module.
Installing/Removing a DIMM Module
6
50