Cleaning The Material End Sensor - Novexx ALX 924 User Manual

ALX 92x
User Manual

Cleaning the material end sensor

The material end sensor [75A] is located inside the ma-
terial guide. The sensor must be cleaned of material
and dust residue regularly. The cleaning intervals de-
pend on the material in use.
 Clean the sensor arm using compressed air (canned
air is available as an accessory).

If the sensor is heavily contaminated, use cleaning
solvent and a lint-free cloth to clean the sensor.
[75] Material end sensor (A) in the inside material guide.
09/2016 | 00 83 Cleaning & Maintenance