Thermal Transfer Ribbon - Novexx ALX 924 User Manual

ALX 92x
User Manual
Ribbon width
Max print speed with ribbon economy activated
(inch/s)
Release the ribbon brake ... turns
[Tab. 11] Limitations for ribbon type 2240-1000-..., depending on the ribbon width.
1) Tighten the red hex nut at the unwind mandrel to the limit and then loosen it the indicated number
of turns.
For details on setting the ribbon brake refer to the user manual, chapter „Startup and operation" >
„Mechanical settings" >

Thermal transfer ribbon

Winding direction
Coloured side wound inward or outward
Roll
Variable
Outer Ø
Core inside Ø
3
Width
[Tab. 12] Dimensions of usable ribbon rolls.
1) Corresponds to 1000 m standard ribbon type NOVEXX 10297-
1000-xxx with a ribbon core of 40.2 mm.
2) With ribbon core adapter (accessory)
3) As a general rule, the thermal transfer ribbon must overlap the label
being printed on both sides by 2 mm.
CAUTION! - If huge ribbon rolls (run length of 1000m) are used with activated ribbon
saving function, there is a hazard of the ribbon tearing off.

Mechanical features
Dispensing edge
Adjustable for direct or indirect dispensing mode.
Label drive
Forward and backward movement of labelling material for real 1:1 applications and full size print of
labels
Label web tension
Easy-to-adjust, patented reliable friction mechanism
Ribbon tension
Adjustable by disc-brakes at the unwind- and rewind-mandrel.
09/2016 | 02
1
Setting the ribbon tension 
Dimension
max. 110 mm
25.4 mm (1")
40.2 ± 0.2mm (1.6")
20 -140 mm
Consider the limitations according to (Tab. 10) and (Tab. 11)!
Ribbon type 2240-1000-...
030 051
12 10
12 8
on page 62.
1
2
30
080 102
9 6
6 6
Product description