Electronic Equipment - Novexx ALX 924 User Manual

ALX 92x
User Manual
Interface
Applicator Interface AI
Connection for external
operation panel
APSF-sensor
(rotary encoder)
[Tab. 13] Data interfaces on the ALX 92x.
1) I/O board and Centronics board are mutually exclusive. Only one of the two additional boards can be installed in the
same machine.
2) USI board and AI board are mutually exclusive. Only one of the two additional boards can be installed in the same ma-
chine.

Electronic equipment

Feature
CPU
RAM
ROM
Memory card slot
Control panel
[Tab. 14] Electronic equipment for ALX 92x.
Certificates and Markings
CE, TÜV-Mark,
The regulation EN 55022 demands for class A devices the following text to be printed in the manual:
„WARNING: This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures."
The FCC regulation demands the following information text for class A devices:
„NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are desi-
gned to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interferen-
ce in which case the user will be required to correct the interference at his own ex-
pense."
IC (Industry Canada) requires the following wording for Class A devices:
„CANADIAN D.O.C. WARNING This digital apparatus does not exceed the Class A
limits for radio noise emissions from digital apparatus set out in the Radio Interferen-
ce Regulations of the Canadian Department of Communications."
09/2016 | 02
Details
Optional (AI board): Control signals for applicators
RS 485; Mini-DIN-6
Single-phase/two-phase, PNP/P-P, 24 V, max. 20 kHz
Details
32 bit MIPS
64 MB
4 MB
SD/MMC
5 keys; LCD graphical display with 128x32 pixels; typically two lines are
displayed with 16 characters each
TÜV -Mark, FCC, EAC, CCC
C US
32 Product description